LSK direct current motors:

• power range: from 2 kW to 750 kW
• external cooling, protection degree: IP23S
• built-in tachogenerator or incremental encoder
• built-in PTC sensors
• prepared for control from DML and Mentor converters

LSK DC motors - catalogue

MBT-type direct current motors:

• permanent magnet excitation
• supply voltage: 12 V DC to 48 V DC
• power: from 0.06 to 0.75 kW.
• protection degree: IP 40 and IP 20 (MBT 1141)

MBT direct current motors – data sheet 

MFA motors – DC motors with permanent magnets

• frame size: from 56 to 80 mm
• power: 0.075 to 1.3 kW

MF motors – DC motors with a separately excited winding

•  frame size: 100 and 112 mm
•  power: 0.45 to 3 kW

MFA & MF direct current motors – catalogue

MS 1 DC motors:

• frame size: from 80 to 132 mm
• power range: from 0.44 to 8.85 kW
• separately excited
• built-in tachogenerator or encoder
• PTC sensors

DC MS 2 motors:

• frame size: 112 i 132 mm
• power: from 1.9 to 18.5 kW
• separately excited
• built-in tachogenerator or encoder
• PTC sensors

MS1 & MS2 direct current motors – catalogue 

G-series direct current motors are manufactured as separately excited motors in three versions:

• multimoto direct current motor
• with external natural air circulation and with protection degree IP23 – type “G” and “GF”
• with own natural air circulation and with protection degree IP44 – type “GE”
• with no natural air circulation and with protection degree IP44 –type “GK” 

All types of motors in this series are manufactured with insulation class F, which allows to achieve very good electrical parameters in a small-size device. The external natural air circulation is provided by blowers mounted on the motors. In motors type “G”, these are radial blowers mounted on the top or on the side of the motor, while in motors type “GF”, these are axial blowers mounted on the motor axis in the rear. The motors are manufactured in foot-mounted flange construction, or in standard foot-mounted construction. The motors meet the requirements of PN-88/E-06701 standard and the requirements of relevant foreign standards.

G-series direct current motors are suitable for powering from thyristor converters type DML, Mentor II, Mentor MP.